Accessoires pour le 7535 G2

1900 mAh Li-Ion Battery for 7535 G2

The 1900 mAh lithium ion battery will provide 8 hours of usage at 5 scans/TX/RX per min.

Part No: 1030070 Model No: HU3000

 

Cable, 6', JAE Connector to D9 male serial

Connect your D9 male serial device to your JAE port.

Part No: N/A Model No: CA1010

 

Cable, 6', JAE Connector to D9 Male Serial Null

Cable, 6', JAE Connector to D9 Male Serial Null

Part No: N/A Model No: CA1015

 

Cable, 6', JAE Connector to USB slave

JAE Connector to USB slave.

Part No: N/A Model No: CA1020

 

Tethered Scanner Cables

JB5 connector to LS3X00.

Part No: N/A Model No: LS3X00

 

Wrist Strap for 7530 G2 and 7535 G2

The Wrist Strap secures the handheld computer to the user's wrist to prevent accidental dropping of the device.

Part No: 30020 Model No: HU6040

 

Shoulder Strap for 7530 G2 and 7535 G2

The Shoulder Strap allows the secure carrying of the 7535 G2 and 7530 G2 handheld computers.

Part No: 1030089 Model No: HU6030

 

Protective Carry Case for 7535 G2 - Yellow Rubber

This snug-fitting yellow rubber carry case is designed to provide extra protection and high visibility in extremely harsh environments where frequent dropping of the device may be a common occurrence.

Part No: 1010067 Model No: HU8085

 

Protective Carry Case for 7535 G2 - Grey Rubber

This snug-fitting rubber carry case is designed to provide extra protection in extremely harsh environments where frequent dropping of the device may be a common occurrence.

Part No: N/A Model No: HU6080

 

Pistol Grip Kit for 7535 G2

The Pistol Grip Kit comes complete with center balanced pistol grip, mounting screws and installation instructions to allow the handheld computer to be used in scanning or imaging applications using the built-in trigger mechanism in the pistol grip handle.

Part No: 1030087 Model No: HU6001

 

7535 G2 Holster (Form Fit)

The holster provides a protective carrying case for all configurations of the handheld computer. It also has separate compartments designed to hold an extra battery and replacement stylus. The holster comes with a leg strap and a terminal strap that is looped through the pistol grip handle to tether the terminal to the holster. With the optional Velcro Belt (PN 18785-001), the holster provides maximum flexibility and comfort.

Part No: 1030092 Model No: HU6055

 

7535 G2 Handstrap Kit

The Handstrap Kit includes the elastic strap, mounting screws and installation instructions to provide an excellent carrying option allowing the handheld computer to fit securely in the palm of your hand while the strap is held across the back of the hand.

Part No: N/A Model No: HU6020

 

Nylon Carrying Case for 7535 G2

Nylon Carrying Case for the 7535 G2.

Part No: N/A Model No: HU6090

 

Nylon Web Belt, 1.5" x 57", Heavy Duty Plastic Buckle

This flexible nylon web belt is 1.5" X 57" and has a heavy duty plastic buckle. It may be used to hold many handheld terminal accessories, such as belt loops, velcro pads, swivel belts, and holsters.

Part No: 30138 Model No: N/A

 

Nylon Web Belt, 1.5" x 48", Plastic Buckle

This flexible nylon web belt is 1.5" x 48" and has a plastic buckle. It may be used to hold many handheld terminal accessories, such as belt loops, velcro pads, swivel belts, and holsters.

Part No: 18108-004 Model No: N/A

 

Touchscreen Protective Cover (package of 12)

Designed to protect the touch screen - particularly for "high touch" applications.

Part No: 1010029 Model No: HU6110

 

Handstrap with Belt Clip

Attaches to the back of the 7535 G2 / 7530 G2 to provide a solid grip of the unit. The belt clip is a larger version of those often offered with cell phones. Even with the strap in place, it is easy to access the battery.

Part No: 1030088 Model No: HU6070

 

Velcro Belt

The 52" Velcro Belt is compatible with 7535 G2 and 7530 G2 belt loops, swivel belts, velcro pads, and holsters, and allows the user to quickly remove or put on the entire apparatus.

Part No: 18785-001 Model No: N/A

 

Belt Loop

The belt loop is used to attach the device to the user's belt or optional Velcro Belt (PN: 18785-001) while securing the handheld computer by looping the cord through the mounting holes in the base of the terminal. It allows the terminal to dangle at the side, ready for use while still attached, securely to the user.

Part No: 1030091 Model No: HU6060

 

Quad Unit Charger and Docking Station

Charges 4 docked 7535 G2 / 7530 G2's while simultaneously providing communications via the Ethernet Port located on the back of the unit.

Part No: 1010043 Model No: HU4004

 

Dual Unit Charger and Docking Station

Charges the docked 7535 G2 / 7530 G2 while simultaneously charging a spare battery located in a receptacle on the side of the unit. This version of the Charger/Dock also provides communications via the Ethernet Port located on the back of the unit.

Part No: 1030161 Model No: HU4002

 

Dual Unit Charger

Charges the "docked" 7535 G2 / 7530 G2 while simultaneously charging a spare battery located in a receptacle on the side of the unit.

Part No: 1030160 Model No: HU3002

 

6 Unit Gang Charger

6 Unit Gang Charger with power and battery status indicatiors will charge batteries in under 2 hours.

Part No: 1030159 Model No: HU3006

 

Wall Bracket for 6 Unit Gang Charger

A 6 Unit Gang Charger Wall Bracket for the 7535 G2 / 7530 G2.

Part No: 1010039 Model No: HU3106

 

Service Kit - PDM (Plus)

Includes:  PDM, Universal AC adapter, 1 USB Cable, Null Modem Serial Cable.

Part No: 1030085 Model No: HU4001

 

PDM (Portable Docking Module)

Attaches to the bottom of the 7535 G2 / 7530 G2 and features power, USB and serial port connectivity.

Part No: 1030083 Model No: HU1005

 

Stylus Passive (Qty 5)

Package of 5 replacement stylus - Yellow.

Part No: 1020006 Model No: HU6100

 

Non Powered Fork Lift Cradle with Port Replicator for 7535 G2

Non Powered Fork Lift Cradle with port replicator with single hand release capability. Various mounting accessories and upgrade kits available as optional extras.

Part No: N/A Model No: HU1020

 

Vehicle-Mount Scanner Holder (Standard)

The vehicle mount scanner holder secures the scanner on the truck, reducing vibration, and goes a long way to help eliminate the possibility of the scanner falling off the truck. The rubber coating also protects the scanner from scratches. This 7862 model holder is standard length. A long length model (7982A) is also available

Part No: 92892 Model No: 7862

 

Vehicle-Mount Scanner Holder (Long)

The vehicle mount scanner holder secures the scanner on the truck, reducing vibration, and goes a long way to help eliminate the possibility of the scanner falling off the truck. The rubber coating also protects the scanner from scratches. This 7862A model holder is long length. A standard length model (7982) is also available.

Part No: 92892 Model No: 7982A

 

Powered Fork Lift Cradle with Port Replicator

Powered Fork Lift Cradle with port replicator with single hand release capability. Various mounting accessories and upgrade kits available as optional extras.

Part No: N/A Model No: HU1030

 

Powered Fork Lift Cradle 10 - 90VDC

Powered Fork Lift Cradle 10 - 90VDC with single hand release capability.  Various mounting accessories and upgrade kits available as optional extras.

Part No: N/A Model No: HU1010

 

Scanner-Holder Mounting Plate

The metal Scanner-Holder Mounting Plate connects to a 7535 G2 cradle, and holds a scanner holder in place, which in turn holds a tethered scanner. This plate can also retain scanner holders (with scanners) on a wall or other fixed location.

Part No: 18449-001 Model No: N/A

 

Non Powered Fork Lift Cradle

Fort Lift Cradle with single hand release capability. Various mounting accessories and upgrade kits available as optional extras

Part No: N/A Model No: HU1000

 

Cradle Vertical Mounting Plate

This mount plate may be used instead of P/N 18447 and 18449. The Vertical mount plate accepts the P/N 92892 holder.

Part No: 18448-001 Model No: N/A

 

Cigarette Lighter Adapter for 7535 G2

Connects to the HU1005 Portable Docking Module. This will allow the 7535 to be charged from a standard 12VDC car cigarette receptacle.

Part No: N/A Model No: HU3012

 

Wall Adapter

Universal Power Supply AC Adapter 15VDC 2.5A. For use with the HU1005 PDM.

Part No: 9003323 Model No: HU3220

 

802.11a/b/g Compact Flash Radio w/ Integrated Antenna

A 802.11a/b/g compact flash radio with integrated antenna.

Part No: N/A Model No: RA2043

 

Radio, (CCX-Certified), 802.11b/g, direct sequence (DS)-extended range

Radio, (CCX-Certified), 802.11b/g, direct sequence (DS)-extended range

Part No: N/A Model No: RA2041

 

Radio Compact Flash 802.11b/g WLAN

This 802.11b/g WLAN radio (also known as WiFi Radio) is provided in a user installable standard Compact Flash (CF) card format. This radio form factor enables users to add a WLAN radio to their device as required without returning it to the depot or having to buy a new device. The radio kit comes with the CF Card Radio, the mechanical stop, and the screws that are required to secure the radio in place.

Part No: N/A Model No: RA2040

 

RFID Reader with 920.5 - 924.5 MHz Reader

Available for China only.

Part No: N/A Model No: RD7950

 

RFID Reader with 865-868 MHz Reader

Available in Europe Only

Part No: N/A Model No: RD7950

 

RFID Reader with 952-956 MHz Reader

Available in Japan Only

Part No: N/A Model No: RD7950

 

RFID Reader, UHF Integrated, 915 MHz

For 7535 G2 / 7530 G2 equipped w Pistol Grip and Tether Port.

Part No: N/A Model No: RD7950